A strong garden-hose backflow valve matches your faucet’s threads, helps stop contaminated water from siphoning into the supply, and suits the way you water. The Eastman 20199 is a straightforward brass hose-bibb choice, while the Boltigen AH90-2 adds a stated lead-free, self-draining design. This roundup compares ten options, from single adapters to multipacks and a dedicated drip-irrigation preventer.
Check whether your faucet needs a standard 3/4-inch hose-thread inlet or the fine-thread connection used by the Dreyoo replacement; those fittings are not interchangeable based on the supplied specifications. Also consider whether you want a self-draining mechanism, a specific pressure rating, or spare units for multiple setups.
Product descriptions do not establish local code compliance, so confirm your installation requirements before relying on any valve for a regulated system.
The Eastman 20199 is the best overall choice for a typical garden hose bib: it has 3/4-inch FHT and MHT connections, a brass body, a self-draining mechanism, and a break-off screw for permanent installation. If lead-free construction is a priority, consider the Boltigen AH90-2, which also specifies self-draining operation. For a drip-irrigation system, the Raindrip R620CT is the more purpose-specific fit, with hose-bibb inlet and irrigation-component outlet threads.
Our Top Picks
Best OverallIts brass body, 3/4-inch FHT-to-MHT connections, self-draining mechanism, and break-off screw suit a typical hose-bibb installation.
View on Amazon
Lead-Free Self-DrainingThis 3/4-inch GHT adapter specifies lead-free brass and automatic drainage on shutoff, combining hose-bibb fit with winter-oriented drainage.
View on Amazon
Lead-Free BrassIts stated lead-free solid-brass construction and standard 3/4-inch fit make it a well-matched option for garden spigots and hoses.
View on Amazon- Best Two-Pack LitOrange A059-2
- Best for Drip Irrigation Raindrip R620CT
Compare the hose-bib backflow preventers
| # | Product | Weight | Material | Size | Thread Size | Buy |
|---|---|---|---|---|---|---|
| 1 | 1. Eastman 20199Best Overall | 0.27 g | Brass | 3/4 Inch FHT x 3/4 Inch MHT | thread.size | View on Amazon |
| 2 | 2. Boltigen AH90-2Lead-Free Self-Draining | 0.14 kg | Brass with Chromium Plating | 3/4'' GHT Female to 3/4'' GHT Male | 0.75 inch | View on Amazon |
| 3 | 3. JB Products 1520Lead-Free Brass | 0.06 kg | Brass | 0.75 Inch | 3/4 Inch | View on Amazon |
| 4 | 4. LitOrange A059-2Best Two-Pack | 0.13 kg | Brass | 2 Pack | — | View on Amazon |
| 5 | 5. Xiny Tool Vacuum BreakerTwo brass garden connections | 0.13 kg | Brass | 3/4 inch | 0.75 inch | View on Amazon |
| 6 | 6. SUNROAD Vacuum BreakerThree-spigot hose setups | 0.24 kg | Brass | 3/4 inch | 3/4 inch | View on Amazon |
| 7 | 7. Raindrip R620CTBest for Drip Irrigation | 22.68 g | Stainless Steel;Polyvinyl Chloride… | No Size | 3/4 inch | View on Amazon |
| 8 | 8. Gulfmew Backflow PreventerMultiple-site irrigation bundle | 1.1 lb | — | 3/4 inch | 3/4 inch | View on Amazon |
| 9 | 9. Dreyoo Fine-Thread BreakerFine-thread faucet replacement | 4.64 oz | Brass | 1-1/16" | 1-1/16" | View on Amazon |
| 10 | 10. YEE Pressure Vacuum BreakerHigh-pressure irrigation systems | — | Brass | 3/4 Inch | 3/4 inch | View on Amazon |
Detailed Reviews: Best Backflow Valve For Garden Hose

#1 · Best Overall
1. Eastman 20199
- Weight: 0.27 g
- Material: Brass
- Size: 3/4 Inch FHT x 3/4 Inch MHT
- Thread Size: thread.size
Best for: Self-draining brass replacement.
Why it ranks #1: Its brass body, 3/4-inch FHT-to-MHT connections, self-draining mechanism, and break-off screw suit a typical hose-bibb installation.
Eastman combines a self-draining mechanism with a heavy-duty brass body, so water drains upon shutoff while the fitting helps prevent backflow into the potable supply. Its 3/4-inch female hose-thread by 3/4-inch male hose-thread connections suit compatible hose bib installations, and a break-off screw supports permanent installation.
The self-draining mechanism releases water when the supply is shut off, a useful feature for an outdoor faucet connection where retained water matters. Its 3/4-inch FHT inlet and 3/4-inch MHT outlet specify the hose-thread arrangement, while the brass body provides the listed durable construction. The break-off screw enables permanent installation, so this is a choice for buyers seeking a fixed hose-bibb fitting rather than a connection intended to be routinely removed.
- Self-draining mechanism drains water upon shutoff
- Heavy-duty brass body
- 3/4-inch FHT inlet and MHT outlet
- Break-off screw supports permanent installation
- The break-off screw makes permanent installation the stated mounting approach.
Skip it if you need multiple fittings with installation supplies; the LitOrange A059-2 set includes two breakers, washers, and tape.
This Eastman fitting suits a compatible outdoor faucet where self-draining operation and permanent attachment are priorities. Confirm the 3/4-inch hose-thread arrangement matches the connection, and consider whether a fixed installation fits your routine.
Full product details
| Brand | Eastman |
|---|---|
| Color | Brass |
| Included Components | hose bib vacuum breaker |
| Item Dimensions | 1.5 x 1.7 x 0.5 inches |
| Item Weight | 0.27 g |
| Dimensions | 1.5 x 1.7 x 0.5 inches |
| Manufacturer | Eastman |
| Part Number | 20199 |
| Manufacturer Warranty Description | No_warranty |
| Material | Brass |
| Model Number | 20199 |
| Size | 3/4 Inch FHT x 3/4 Inch MHT |
| Thread Size | thread.size |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Eastman 3/4 Inch FHT x 3/4 Inch MHT Hose Bibb Anti Siphon Vacuum Breaker, Brass Plumbing Fitting, 20199
View on Amazon
#2 · Lead-Free Self-Draining
2. Boltigen AH90-2
- Weight: 0.14 kg
- Material: Brass with Chromium Plating
- Size: 3/4'' GHT Female to 3/4'' GHT Male
- Thread Size: 0.75 inch
Best for: Winter-conscious faucet repair.
Why it ranks #2: This 3/4-inch GHT adapter specifies lead-free brass and automatic drainage on shutoff, combining hose-bibb fit with winter-oriented drainage.
Boltigen pairs a self-draining mechanism with lead-free brass, allowing the faucet to drain automatically upon shutoff while helping prevent backflow into potable water. Its 3/4-inch GHT female-to-male arrangement identifies the hose-bib connection, making it a focused replacement option for compatible outdoor garden faucets where freezing is a concern.
The self-draining function lets the faucet drain when shut off, which the supplied description connects to preventing freezing in winter. The 3/4-inch GHT female inlet and male outlet define the hose-bib thread arrangement, helping buyers match this adapter to a compatible outdoor faucet. Lead-free brass with chromium plating is the listed material, linking the construction to the product's stated potable-water use. This single adapter suits replacement or repair rather than outfitting several connections at once.
- Self-draining operation upon shutoff
- Lead-free brass construction with chromium plating
- 3/4-inch GHT female-to-male connections
- Intended to help prevent freezing in winter
- The listing supplies one adapter rather than a multi-pack.
Skip it if you need multiple fittings for several outdoor faucets; the Gulfmew TD-Gulfmew-2389 includes six backflow preventers.
This Boltigen adapter suits a buyer repairing one compatible 3/4-inch outdoor faucet and prioritizing automatic draining for winter. Match its GHT female-to-male connection to the hose bib before choosing it.
Full product details
| Brand | Boltigen |
|---|---|
| Color | Silver |
| Item Weight | 0.14 kg |
| Manufacturer | Boltigen |
| Part Number | AH90-2 |
| Material | Brass with Chromium Plating |
| Model Number | AH90-2 |
| Size | 3/4'' GHT Female to 3/4'' GHT Male |
| Thread Size | 0.75 inch |
Listed on Amazon as: Lead-Free Brass Self-Draining Vacuum Breaker 3/4'' GHT Female x 3/4'' GHT Male Hose Bib Anti Siphon Valve Backflow Preventer Adapter, for Outdoor Garden Faucet Spigot Repair Replacement
View on Amazon
#3 · Lead-Free Brass
3. JB Products 1520
- Weight: 0.06 kg
- Material: Brass
- Size: 0.75 Inch
- Thread Size: 3/4 Inch
Best for: Tool-free spigot installation.
Why it ranks #3: Its stated lead-free solid-brass construction and standard 3/4-inch fit make it a well-matched option for garden spigots and hoses.
JB Products specifies tool-free attachment to standard 3/4-inch hose bibs, garden spigots, and outdoor faucets, making installation straightforward for compatible connections. Its lead-free solid brass construction is listed for corrosion resistance and outdoor durability, while the backflow function addresses contaminated water from hoses, fertilizers, or chemicals flowing toward the clean supply.
The standard 3/4-inch size is intended to attach directly to compatible outdoor faucets and spigots without tools, simplifying installation at a hose bib. The solid brass body is described as lead-free and corrosion-resistant, supporting outdoor use. JB Products identifies garden hoses, fertilizers, and chemicals as relevant applications for its backflow protection. Its compact listed dimensions of 1.25 inches on each side may also suit buyers looking for a small individual fitting rather than a multi-piece set.
- Tool-free attachment is specified
- Fits standard 3/4-inch hose bibs and outdoor faucets
- Lead-free solid brass construction
- Backflow protection is listed for hoses, fertilizers, and chemicals
- This listing supplies an individual vacuum breaker, not a multi-piece set.
Skip it if you need several valves for multiple spigots; the SUNROAD SHINTAI-F3/4-GB includes three vacuum breakers.
This JB Products valve fits buyers who want a single tool-free fitting for a compatible 3/4-inch garden spigot, including hose use involving fertilizers or chemicals. It is an individual valve, not a multi-connection kit.
Full product details
| Brand | JB Products |
|---|---|
| Color | Brass/Gold |
| Item Dimensions | 1.25 x 1.25 x 1.25 inches |
| Item Weight | 0.06 kg |
| Dimensions | 1.25 x 1.25 x 1.25 inches |
| Manufacturer | JB Products |
| Part Number | 1520 |
| Material | Brass |
| Model Number | 1520 |
| Size | 0.75 Inch |
| Thread Size | 3/4 Inch |
Listed on Amazon as: Vacuum Breaker 3/4 Inch Solid Brass Hose Bib Backflow Preventer for Garden Spigot RV
View on Amazon
#4 · Best Two-Pack
4. LitOrange A059-2
- Weight: 0.13 kg
- Material: Brass
- Size: 2 Pack
Best for: Multi-spigot brass protection.
Why it ranks #4: The two brass valves fit standard 3/4-inch hose threads and specify maximum operating pressure of 125 psi and temperature of 180°F.
Two brass vacuum breakers come with washers and roughly 350 inches of tape, giving gardeners supplies for more than one hose connection. Their 3/4-inch female hose-thread inlet and male hose-thread outlet connect standard hose arrangements while the valve helps prevent back-siphonage into the water supply.
The 3/4-inch female inlet and male outlet make this a hose-bibb fitting for compatible standard hose connections, including listed hose bibs, sillcocks, RVs, garden spigots, and end valves. Its brass construction provides a metal fitting, while the stated maximum operating pressure of 125 psi and temperature of 180°F define its operating limits. A break-off screw supports permanent attachment, and the two included washers and tape provide installation supplies for the pair of breakers.
- Two vacuum breakers and two washers are included
- About 350 inches of tape is supplied
- Brass construction
- Break-off screw allows permanent attachment
- Maximum operating pressure is 125 psi, limiting use above that rating.
Skip it if you need a valve rated above 125 psi; the YEE 3/4-inch pressure vacuum breaker is listed at 400 PSI.
Choose this LitOrange pair when protecting two compatible garden or RV hose connections is the goal and included tape is useful. Check that 3/4-inch hose threads and the 125 psi limit suit your setup.
Full product details
| Brand | LitOrange |
|---|---|
| Color | Red |
| Item Weight | 0.13 kg |
| Manufacturer | Litorange |
| Part Number | A059-2 |
| Material | Brass |
| Model Number | A059-2 |
| Size | 2 Pack |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including lead and lead compounds which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: 2 Pack Brass 3/4" Inch GHT Hose Bibb Backflow Preventer Vacuum Breaker
View on Amazon
#5
5. Xiny Tool Vacuum Breaker
- Weight: 0.13 kg
- Material: Brass
- Size: 3/4 inch
- Thread Size: 0.75 inch
Best for: Two brass garden connections.
Why it ranks #5: This two-pack uses solid brass and 3/4-inch connections, with washers included for two faucet installations or a spare.
Xiny Tool supplies two solid-brass vacuum breakers with two washers, giving buyers a pair of fittings for compatible garden spigots or RV hose connections. The 3/4-inch size and anti-siphoning function address standard hose-bib protection, while the listed freezing-protection function adds a seasonal consideration for outdoor faucet use.
The 3/4-inch thread size is specified for garden spigots and RV use, so these fittings suit buyers protecting more than one compatible hose connection. Brass construction is described as durable and corrosion-resistant, a relevant feature for outdoor placement. The product also lists backflow prevention, anti-siphoning, and freezing protection, linking its function to potable-water protection and winter concerns. Two included washers support fitting both breakers, though no tape or installation tool is listed in the supplied details.
- Two vacuum breakers are included
- Two washers are supplied
- Brass construction is described as corrosion-resistant
- Listed for backflow prevention and anti-siphoning
- No installation tape or tool is listed among the included components.
Skip it if you want a self-draining mechanism explicitly described at shutoff; the Boltigen AH90-2 specifies automatic draining.
Choose this Xiny Tool pair when two compatible 3/4-inch garden or RV hose connections need brass anti-siphon protection. Its listed freezing protection may matter outdoors, but installation tape and tools are not listed as included.
Full product details
| Brand | Xiny Tool |
|---|---|
| Color | Brass |
| Included Components | Faucet Vacuum Breaker |
| Item Dimensions | 3 x 4 x 5 inches |
| Item Weight | 0.13 kg |
| Dimensions | 3 x 4 x 5 inches |
| Manufacturer | Xiny Tool |
| Part Number | Faucet Vacuum Breaker |
| Material | Brass |
| Model Number | Faucet Vacuum Breaker |
| Size | 3/4 inch |
| Thread Size | 0.75 inch |
Listed on Amazon as: 2 Pack Faucet Vacuum Breaker, 3/4 Inch Solid Brass Hose Bib Backflow Preventer for Garden Spigot RV
View on Amazon
#6
6. SUNROAD Vacuum Breaker
- Weight: 0.24 kg
- Material: Brass
- Size: 3/4 inch
- Thread Size: 3/4 inch
Best for: Three-spigot hose setups.
Why it ranks #6: Three brass 3/4-inch-thread valves come with washers, set screws, and an Allen wrench; the description notes that drainage can spray water.
A three-piece brass set supplies vacuum breakers, washers, set screws, and an Allen wrench, equipping several standard hose connections with the listed installation components. Its 3/4-inch thread size is specified to fit most standard American hose, making it a practical choice for multiple spigots or RV hose connections.
The three breakers let you address multiple hose bibs, garden spigots, or RV connections without buying a single fitting for each location. The included washers, set screws, and Allen wrench give you the listed hardware and tool for installation. SUNROAD also notes a drain hole that lets remaining pipe water escape; expect water to spray out when shutting off the water, so keep clear during that step. Its stated 3/4-inch thread suits most standard American hose.
- Three brass vacuum breakers are included
- Washers, set screws, and Allen wrench are supplied
- 3/4-inch thread is specified for most standard American hose
- Drain hole releases remaining water in the pipe
- Water sprays from the drain hole when the water is turned off.
Skip it if you want a single fitting with a specified self-draining shutoff; the Eastman 20199 lists a self-draining mechanism.
This SUNROAD set suits households protecting several standard hose or RV connections and wanting included set screws and an Allen wrench. Its drain hole releases water at shutoff, so account for spray when operating it.
Full product details
| Brand | SUNROAD |
|---|---|
| Color | Brass |
| Included Components | VACUUM BREAKER,WASHERS,SET SCREWS,ALLEN WRENCH |
| Item Dimensions | 3.35 x 3.35 x 1.38 inches |
| Item Weight | 0.24 kg |
| Dimensions | 3.35 x 3.35 x 1.38 inches |
| Manufacturer | SHINTAI |
| Material | Brass |
| Model Number | SHINTAI-F3/4-GB |
| Size | 3/4 inch |
| Thread Size | 3/4 inch |
| Additional Information | Important Information Small parts. Not for children under 3 yrs. |
Listed on Amazon as: 3 Pack SUNROAD Brass 3/4" Inch MHT Hose Bibb Connector Backflow Preventer Vacuum Breaker,Check Valve For Garden Spigot RV Hose Connection,Anti-Siphon Fitting with extra set screws
View on Amazon
#7 · Best for Drip Irrigation
7. Raindrip R620CT
- Weight: 22.68 g
- Material: Stainless Steel;Polyvinyl Chloride…
- Size: No Size
- Thread Size: 3/4 inch
Best for: Drip irrigation connection.
Why it ranks #7: Its 3/4-inch FHT inlet connects to a hose bib and its MHT outlet is specified for drip-system components such as timers.
A 3/4-inch female hose-thread inlet and male hose-thread outlet place this Raindrip preventer directly between a hose bib or faucet and drip-system components. It helps stop impure water reversing into the clean supply, while its connection format supports a watering workflow that can include a timer, pressure regulator, or adapter.
Connect the female hose-thread side to a hose bib or faucet, then use the male outlet for drip-system components such as a timer, pressure regulator, or adapter. That inline arrangement makes the fitting specifically useful at the water-source end of a drip setup. The atmospheric vacuum breaker is intended to prevent reverse flow from contaminating the supply, and Raindrip notes that backflow prevention is required by most local health codes for potable, and sometimes non-potable, drip-system water sources.
- 3/4-inch female inlet connects to a hose bib or faucet
- Male outlet connects to drip-system components
- Helps prevent impure water flowing back into the supply
- Suitable for a drip-system water-source connection
- The listed connection is for drip-system components, not a multi-pack of hose bib fittings.
Skip it if you need several ordinary hose bib fittings; the Gulfmew six-piece 3/4-inch set covers multiple watering connections.
Choose the Raindrip when adding backflow protection at the source of a drip irrigation system with compatible 3/4-inch hose threads. Its value is that specific inline workflow, rather than supplying several spigot fittings.
Full product details
| Brand | Raindrip |
|---|---|
| Color | Black |
| Included Components | Preventer |
| Item Dimensions | 2 x 4 x 5 inches |
| Item Weight | 22.68 g |
| Dimensions | 2 x 4 x 5 inches |
| Manufacturer | Raindrip |
| Part Number | 100050150 |
| Manufacturer Warranty Description | Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling. |
| Material | Stainless Steel;Polyvinyl Chloride (PVC);Acrylonitrile Butadiene Styrene (ABS) |
| Model Number | R620CT |
| Size | No Size |
| Thread Size | 3/4 inch |
| Additional Information | Important information Safety Information safety_warning Directions Not_Applicable |
Listed on Amazon as: Raindrip R620CT, Anti-Siphon Backflow Preventer, 3/4-Inch FHT X 3/4-Inch MHT, Connects to Hose Bib and Drip Irrigation System, Blister Package, Plastic, Black
View on Amazon
#8
8. Gulfmew Backflow Preventer
- Weight: 1.1 lb
- Size: 3/4 inch
- Thread Size: 3/4 inch
Best for: Multiple-site irrigation bundle.
Why it ranks #8: The six-unit set includes filters and two rolls of plumber tape for multiple outdoor watering setups, with 3/4-inch threads specified.
Six 3/4-inch hose-bib backflow preventers, six filters, and two rolls of waterproof tape make this Gulfmew set suited to outfitting several watering locations. The listed applications span drip irrigation, garden hoses, sprinklers, RV hookups, greenhouses, and raised beds, while the 3/4-inch FHT-by-MHT connections define its hose-thread format.
The six preventers and six filters support multiple outdoor watering arrangements, from hose bibs and sprinklers to greenhouse watering and raised beds. Two rolls of waterproof tape are included for installation, so the bundle supplies more than the valves alone. Its 3/4-inch FHT inlet and MHT outlet specify a female-to-male hose-thread connection for compatible setups. This quantity makes sense when several locations need fittings, but is less tailored to a buyer replacing only one faucet valve.
- Six 3/4-inch backflow preventers included
- Six filters supplied
- Two rolls of waterproof tape included
- Listed for varied garden, RV, greenhouse, and irrigation setups
- Six valves may be more than needed for a single faucet replacement.
Skip it if you need only one self-draining replacement valve; the Eastman 20199 specifies a self-draining mechanism for hose bibs.
This Gulfmew bundle suits gardeners setting up several compatible hose, sprinkler, or irrigation points and wanting filters and tape included. Its six-valve quantity and 3/4-inch FHT-to-MHT format are the main fit considerations.
Full product details
| Brand | Gulfmew |
|---|---|
| Item Dimensions | 4.13 x 4.02 x 3.5 inches |
| Item Weight | 1.1 pounds |
| Dimensions | 4.13 x 4.02 x 3.5 inches |
| Manufacturer | Gulfmew |
| Part Number | TD-Gulfmew-2389 |
| Model Number | TD-Gulfmew-2389 |
| Size | 3/4 inch |
| Thread Size | 3/4 inch |
Listed on Amazon as: 6 Pcs Backflow Preventer, 3/4" FHTx3/4" MHT Hose Bib Vacuum Breaker
View on Amazon
#9
9. Dreyoo Fine-Thread Breaker
- Weight: 4.64 oz
- Material: Brass
- Size: 1-1/16"
- Thread Size: 1-1/16"
Best for: Fine-thread faucet replacement.
Why it ranks #9: It is a self-draining brass replacement with a 1-1/16-inch fine-thread inlet, so it suits a narrower faucet-compatibility case.
A 1-1/16-inch fine-thread inlet sets this Dreyoo self-draining breaker apart from standard 3/4-inch female hose-thread models, making it a replacement option for compatible fine-thread hose bibs. It pairs that inlet with a 3/4-inch male hose-thread outlet and lists compatibility with PK1380, along with washers and sealing tape.
The fine-thread inlet measures 1-1/16 inches, while the outlet is 3/4-inch MHT; this distinct combination helps identify its intended faucet connection and hose-side fit. Dreyoo says it replaces PK1380 and describes the valve as self-draining, linking the design to outdoor faucet maintenance and freeze concerns. The included four washers and sealing tape provide listed sealing supplies. Its maximum pressure of 125 PSI and temperature of 180°F set explicit operating boundaries for the replacement.
- 1-1/16-inch fine-thread inlet
- 3/4-inch male hose-thread outlet
- Self-draining design
- Four washers and sealing tape included
- The fine-thread inlet is not the standard 3/4-inch female hose-thread connection.
Skip it if you have a standard 3/4-inch GHT faucet; the Boltigen AH90-2 uses a 3/4-inch GHT female inlet.
Choose Dreyoo for a compatible fine-thread outdoor faucet replacement, especially when its PK1380 compatibility and included sealing supplies fit the repair. Its 1-1/16-inch inlet is the key boundary; verify that thread type.
Full product details
| Brand | Dreyoo |
|---|---|
| Included Components | 1 x Fine Thread self draining vacuum breaker, 1 x Sealing tape, 4 x Washers |
| Item Dimensions | 2.6 x 1.77 x 1.38 inches |
| Item Weight | 4.64 ounces |
| Dimensions | 2.6 x 1.77 x 1.38 inches |
| Manufacturer | Dreyoo |
| Part Number | DR-Dreyoo-1724 |
| Material | Brass |
| Model Number | DR-Dreyoo-1724 |
| Outlet Connection Size | 0.75 inches |
| Size | 1-1/16" |
| Thread Size | 1-1/16" |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: Dreyoo Self Draining Vacuum Breaker, Replacement for PK1380, Anti Siphon Valve with 4 Washers and 1 Sealing Tape, Hose Bib Backflow Preventer for Garden Outdoor Faucet Spigot(Fine Thread)
View on Amazon
#10
10. YEE Pressure Vacuum Breaker
- Material: Brass
- Size: 3/4 Inch
- Thread Size: 3/4 inch
Best for: High-pressure irrigation systems.
Why it ranks #10: This 3/4-inch brass pressure-vacuum-breaker assembly is described for sprinkler and irrigation lines, rather than as a simple hose-bibb adapter.
A 400 PSI maximum-pressure rating distinguishes this YEE pressure vacuum breaker assembly for compatible lawn sprinkler and irrigation systems. Its 3/4-inch inlet and outlet connect matching garden water lines, while the brass construction is described as corrosion-resistant for outdoor durability and the vacuum-breaking action helps stop back-siphonage toward the clean supply.
The 3/4-inch inlet and outlet provide a defined connection size for compatible irrigation lines, while the pressure vacuum breaker assembly is listed with a maximum pressure of 400 PSI. That rating is the key operating specification for buyers whose system requires a higher stated pressure limit than ordinary hose-bib fittings. The brass body is described as thickened and corrosion-resistant, supporting outdoor placement, and its vacuum-breaking action is intended to interrupt back-siphonage before irrigation water returns toward the clean supply.
- Maximum pressure rating is 400 PSI
- 3/4-inch inlet and outlet
- Brass construction is described as corrosion-resistant
- Intended for lawn sprinkler and irrigation systems
- This is an irrigation pressure vacuum breaker assembly, not a multi-pack of hose-bib adapters.
Skip it if you need a pair of ordinary hose bib valves with tape; the LitOrange A059-2 includes two breakers and installation supplies.
Choose the YEE assembly for compatible lawn irrigation or sprinkler lines where its 400 PSI rating is relevant. Its 3/4-inch connections and pressure-vacuum-breaker format should match the intended system, rather than a multi-hose setup.
Full product details
| Brand | YEE |
|---|---|
| Included Components | 3/4" 720A Pressure Vacuum Breaker |
| Inlet Connection Size | 0.75 inches |
| Item Dimensions | 8.4 x 8 x 4.5 inches |
| Dimensions | 8.4 x 8 x 4.5 inches |
| Manufacturer | YEE |
| Part Number | Y101-YJ-AM-25 |
| Material | Brass |
| Model Number | Y101-YJ-AM-25 |
| Outlet Connection Size | 0.75 inches |
| Size | 3/4 Inch |
| Thread Size | 3/4 inch |
Listed on Amazon as: 3/4 Inch Backflow Preventer, Brass Pressure Vacuum Breaker Assembly, 400 PSI Sprinkler Backflow Valve for Lawn Irrigation, Garden Water Lines and Outdoor Anti-Siphon Protection
View on AmazonCheck the faucet thread before choosing a replacement
A thread mismatch is a common reason a hose-bibb vacuum breaker will not fit, even when both products mention 3/4-inch connections. Most options here describe standard hose-thread connections, including the Eastman 20199’s 3/4-inch FHT inlet and MHT outlet and the Boltigen AH90-2’s 3/4-inch GHT connections. The Dreyoo replacement is different: its inlet is 1-1/16-inch fine thread, while its outlet is 3/4-inch male hose thread.
Its listing identifies it as a replacement for PK1380, so do not assume it fits a standard garden spigot simply because the outlet matches a hose. Check the faucet’s existing fitting or the old breaker’s thread before ordering.
Thread size labels alone may not describe thread type, and the supplied product details do not provide a universal compatibility chart.
A breaker can release water when the hose shuts off
A brief discharge at shutoff can be part of a vacuum breaker’s operation, rather than proof that the fitting has failed. The SUNROAD description specifically warns that remaining water may spray from its drain hole when the water is turned off; it also says the hole drains water left in the pipe. That can affect where you position yourself or nearby items during operation.
Other listings describe self-draining behavior: the Eastman mechanism drains upon shutoff, and Boltigen says its faucet automatically drains. These descriptions do not establish that every leak or continuous spray is normal.
If water continues escaping, the connection will not seal, or the faucet behaves unexpectedly, check the washer and thread match and consult the product instructions or a plumbing professional. The listings do not specify a universal diagnosis or repair procedure.
How to Choose a Garden-Hose Backflow Valve
Thread type and connection direction
Look for an inlet that matches your faucet and an outlet that accepts your hose or irrigation component. Several options specify standard 3/4-inch hose threads: Eastman lists 3/4-inch FHT x 3/4-inch MHT, while Boltigen gives 3/4-inch GHT female-to-male connections. Dreyoo instead has a 1-1/16-inch fine-thread inlet and a 3/4-inch MHT outlet, making it a replacement-style option for a specific fitting.
Raindrip also lists FHT-to-MHT connections and identifies drip-system components as its outlet use. A standard spigot owner should favour a standard 3/4-inch hose-thread model; choose Dreyoo only when the faucet requires that fine-thread inlet.
Construction and drainage features
Choose a body and operating feature that match your installation priorities. Brass construction is specified for Eastman, LitOrange, Xiny Tool, JB Products, Boltigen, and SUNROAD; Boltigen specifically calls its brass lead-free, and JB Products also describes its brass as lead-free. Eastman specifies a self-draining mechanism and permanent-installation break-off screw, while Boltigen says its fitting drains automatically on shutoff.
LitOrange also includes a break-off screw but does not list self-draining operation in the supplied features. If lead-free wording matters, compare the products that state it directly; if drainage is your deciding feature, favour Eastman or Boltigen.
Product material descriptions alone do not establish compliance with every local plumbing requirement.
Pressure rating and package quantity
Check stated pressure limits where available, then decide how many hose bibs need protection. LitOrange specifies a maximum operating pressure of 125 psi and supplies two valves; Dreyoo also lists 125 psi maximum, but its fine-thread inlet limits its use to compatible faucets. Eastman provides one brass fitting without a pressure figure in the supplied details.
Pack sizes range from individual products to two valves from LitOrange or Xiny Tool, three from SUNROAD, and six from Gulfmew. A single compatible spigot may call for one fitting, while several outdoor connections may favour a multipack.
Do not treat the YEE assembly’s stated 400 PSI rating as a direct substitute for a standard hose-bibb adapter: it is presented as a pressure-vacuum-breaker assembly for irrigation systems.
Which Garden-Hose Backflow Valve Should You Choose?
For a typical hose bib, choose the Eastman 20199: its brass body, 3/4-inch FHT-to-MHT fit, self-draining mechanism, and break-off screw make it the strongest all-around match in this group. If you want stated lead-free brass and self-draining operation, the Boltigen AH90-2 is a close alternative. Choose JB Products 1520 for a single standard 3/4-inch fitting described as lead-free solid brass, or LitOrange A059-2 when you want two valves and a stated 125 psi limit.
For drip irrigation, select Raindrip R620CT, whose outlet is specified for system components. Consider Dreyoo Fine-Thread Breaker only if your faucet needs its 1-1/16-inch fine-thread inlet.
The YEE assembly is aimed at sprinkler or irrigation lines, not a simple hose-bibb connection.
Frequently Asked Questions
How can I tell whether my outdoor faucet has standard hose threads or fine threads?
Check the faucet’s thread pattern and measure its diameter, then compare those details with the product’s stated inlet size and thread type. If you cannot identify the pattern confidently, consult the faucet manufacturer or a plumbing professional before ordering; a connector that does not match may not seal properly.
Does installing a hose-bibb vacuum breaker satisfy local backflow-prevention rules?
Not necessarily. Requirements depend on your location, water use, and the backflow hazard involved, and a hose-bibb vacuum breaker may not meet every local rule. Check with your water provider or local building authority before relying on one for compliance, especially for irrigation or other connected systems.
Why might a vacuum breaker spray or leak when I shut off the water?
A brief discharge can occur as pressure changes, but persistent spraying or leaking may indicate a poor seal, debris, damage, or an incompatible connection. Shut off the supply, inspect the fitting and washers, and confirm the threads match. If leakage continues, stop using it and seek qualified help.
How should I choose between a single valve and a multipack?
Choose based on how many compatible faucets or hose connections you need to protect. The listed products include single valves and packs of two, three, or six, but confirm each item’s thread type and connection before assuming it fits your faucet. A larger pack does not resolve a thread mismatch.
Which option is suited to drip irrigation rather than a regular hose connection?
The Raindrip R620CT is the purpose-specific choice for drip irrigation: its stated connections are a hose-bibb inlet and an outlet for irrigation-system components. The YEE assembly is aimed at sprinkler or irrigation lines. For a typical garden hose bib, the Eastman 20199 is the stronger all-around match.
Final Words
For a typical garden hose bib, choose the Eastman 20199: its 3/4-inch FHT-to-MHT connections, brass body, self-draining mechanism, and break-off screw make it the strongest all-around fit in this group. Consider the Boltigen AH90-2 if stated lead-free construction and self-draining operation matter. For drip irrigation, choose Raindrip R620CT; first confirm the faucet’s thread type and local requirements.


